Perth
Western Australia (WA)
Regional project locations
Albany, Bunbury, Busselton, Geraldton, Kalgoorlie–Boulder, Karratha, Mandurah, Port Hedland, Broome
Mining & quarry equipment / Australia
Assess an electromagnetic feeder for a controlled feed duty, with attention to the material, hopper interface and required adjustment range.
Select the image for a closer look.
Project selection
Explain the process receiving the material and how steady or variable the feed must be. Provide bulk properties, lump size and any sticking observations. Ask for the proposed tray, controller and support arrangement, and check how the feeder's command and status signals will connect to existing plant controls.
A useful procurement comparison connects the process duty to the actual installation. Provide the Australian project location and relevant access or utility constraints. Ask for matching datasheets, arrangement drawings and a component list, with exclusions made explicit. Confirm model-specific details with the supplier before transferring information into the final project specification.
Use the enquiry form to share details of your feed-rate range, material flow data, hopper outlet and control interface. Add your site location, project stage and preferred timing. If you are still gathering technical information, tell us what you have so far. We can help identify what is needed for the next assessment.
The details that matter
| Model | Feeding capacity(tph) | Max input size(mm) | Power(kw) | Valtage(v) | Current(a) | Double swing(mm) | Enquire |
|---|---|---|---|---|---|---|---|
| GZ1 | 5 | 50 | 0.06 | 220 | <=1 | 1.75 | Request quoteGZ1 |
| GZ2 | 10 | 60 | 0.15 | 220 | <=2.3 | 17.5 | Request quoteGZ2 |
| GZ3 | 25 | 70 | 0.2 | 220 | <=3.8 | 1.75 | Request quoteGZ3 |
| GZ4 | 50 | 100 | 0.45 | 220 | <=7 | 1.75 | Request quoteGZ4 |
| GZ5 | 100 | 150 | 0.65 | 220 | <=7 | 1.75 | Request quoteGZ5 |
| Request a quote for your model | |||||||
Specifications are based on published manufacturer information. Capacity depends on material and configuration. The downloadable PDF is a website summary; request current manufacturer drawings and the configured supply scope before ordering.
State the normal feed rate and required adjustment range, material properties and the receiving process. Ask what performance and control arrangement the supplier proposes for those conditions.
Request an itemised scope showing controller, electrical components, supports and connection requirements. Clarify which signals and services are needed from the wider plant system.
Across Australia
Equipment enquiries for Perth, Brisbane, Sydney, Melbourne, Adelaide, Hobart, Darwin, Canberra and regional project locations. Tell us where your site is so freight, access and installation requirements can be assessed.
Western Australia (WA)
Albany, Bunbury, Busselton, Geraldton, Kalgoorlie–Boulder, Karratha, Mandurah, Port Hedland, Broome
Queensland (QLD)
Cairns, Gold Coast, Sunshine Coast, Townsville, Toowoomba, Mackay, Rockhampton, Bundaberg, Gladstone, Mount Isa, Hervey Bay, Ipswich
New South Wales (NSW)
Newcastle, Wollongong, Albury, Armidale, Bathurst, Broken Hill, Coffs Harbour, Dubbo, Goulburn, Griffith, Lismore, Orange, Port Macquarie, Tamworth, Wagga Wagga
Victoria (VIC)
Geelong, Ballarat, Bendigo, Mildura, Shepparton, Warrnambool, Wodonga, Wangaratta, Latrobe Valley
South Australia (SA)
Mount Gambier, Whyalla, Port Augusta, Port Lincoln, Port Pirie, Murray Bridge
Tasmania (TAS)
Launceston, Devonport, Burnie
Northern Territory (NT)
Alice Springs, Katherine, Palmerston, Tennant Creek
Australian Capital Territory (ACT)
Canberra region
Delivery, availability and service scope are confirmed for each quotation.
Your next project starts here
Your equipment is already selected when you enquire from a product page. Add your contact details and a short message, and we can work through the requirements with you.
01 / Select your equipment
02 / Tell us what you need
03 / Discuss your project