
Perth
Western Australia (WA)
Regional project locations
Albany, Bunbury, Busselton, Geraldton, Kalgoorlie–Boulder, Karratha, Mandurah, Port Hedland, Broome
Mining & quarry equipment / Australia
Develop an HGM micro-powder enquiry around the full particle-size specification and the quality requirements of the intended end use.
Select the image for a closer look.
Project selection
For fine powder projects, identify the required distribution, oversize limit and test method rather than relying on the word ultrafine. Ask about sample evaluation, contamination control and the proposed collection arrangement. Review packing and handling because the useful product specification must be maintained beyond the grinding stage.
Bring the operating layout into the enquiry early. For an Australian installation, identify the site location, access constraints and available services, then request drawings for the exact proposed configuration. Ask for the equipment supply, purchaser responsibilities and installation interfaces to be listed clearly so competing proposals can be assessed against the same requirement.
Use the enquiry form to share details of your mineral sample, size-distribution limits, purity requirement and packaging format. Add your site location, project stage and preferred timing. If you are still gathering technical information, tell us what you have so far. We can help identify what is needed for the next assessment.
The details that matter
| Model | Average diameter (mm) | Rollers (pcs) | Roller rings (pcs) | Input size of main frame (mm) | Finished product (micron) | Finished product (mesh) | Capacity (t/h) | Main grinder (kW) | Powder separator (kW) | Draft fan (kW) | Feeder (kW) | Discharge valve (kW) | Overall L×W×H (m) | Enquire |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HGM80 | 800 | 21 | 3 | ≤ 10 | 5-47 | Confirm with manufacturer | 0.5-6 | 75 | 22 | 45 | 0.06 | 1.1 | 8.6x4.1x6 | Request quoteHGM80 |
| HGM1028 | 1000 | 27 | 3 | ≤ 15 | Confirm with manufacturer | Confirm with manufacturer | 1.2-10.2 | 110 | 30 | 75 | 0.15 | 2.2 | 14.5x3.6x7.5 | Request quoteHGM1028 |
| HGM1036 | 1000 | 36 | 4 | ≤ 15 | Confirm with manufacturer | Confirm with manufacturer | 1.2-11.5 | 132 | 37 | 110 | 0.15 | 3 | 14.3x4.2x7.5 | Request quoteHGM1036 |
| HGM1250 | 1250 | 32-44 | 4 | ≤ 20 | Confirm with manufacturer | Confirm with manufacturer | 2.5-20.5 | 185 | 75 | 132 | 0.15 | 3 | 19.2x4.4x8.5 | Request quoteHGM1250 |
| Request a quote for your model | ||||||||||||||
Specifications that need clarification are marked for confirmation or omitted. Request the current datasheet for your selected model and configuration.
Specifications are based on published manufacturer information. Capacity depends on material and configuration. The downloadable PDF is a website summary; request current manufacturer drawings and the configured supply scope before ordering.
Provide the customer's particle-size limits and measurement method, plus purity or colour requirements where relevant. Ask for a sample-based assessment using the intended mineral feed.
Request a model-specific proposal at the required powder specification and feed condition. Do not transfer a capacity figure quoted for a different fineness or material to your project.
Across Australia
Equipment enquiries for Perth, Brisbane, Sydney, Melbourne, Adelaide, Hobart, Darwin, Canberra and regional project locations. Tell us where your site is so freight, access and installation requirements can be assessed.

Western Australia (WA)
Albany, Bunbury, Busselton, Geraldton, Kalgoorlie–Boulder, Karratha, Mandurah, Port Hedland, Broome

Queensland (QLD)
Cairns, Gold Coast, Sunshine Coast, Townsville, Toowoomba, Mackay, Rockhampton, Bundaberg, Gladstone, Mount Isa, Hervey Bay, Ipswich

New South Wales (NSW)
Newcastle, Wollongong, Albury, Armidale, Bathurst, Broken Hill, Coffs Harbour, Dubbo, Goulburn, Griffith, Lismore, Orange, Port Macquarie, Tamworth, Wagga Wagga

Victoria (VIC)
Geelong, Ballarat, Bendigo, Mildura, Shepparton, Warrnambool, Wodonga, Wangaratta, Latrobe Valley

South Australia (SA)
Mount Gambier, Whyalla, Port Augusta, Port Lincoln, Port Pirie, Murray Bridge

Tasmania (TAS)
Launceston, Devonport, Burnie

Northern Territory (NT)
Alice Springs, Katherine, Palmerston, Tennant Creek

Australian Capital Territory (ACT)
Canberra region
Delivery, availability and service scope are confirmed for each quotation.
Enhanced Raymond milling
4 published models
Your next project starts here
Your equipment is already selected when you enquire from a product page. Add your contact details and a short message, and we can work through the requirements with you.
01 / Select your equipment
02 / Tell us what you need
03 / Discuss your project