
Perth
Western Australia (WA)
Regional project locations
Albany, Bunbury, Busselton, Geraldton, Kalgoorlie–Boulder, Karratha, Mandurah, Port Hedland, Broome
Mining & quarry equipment / Australia
Choose a powder classifier around the separation required and the way accepted powder and coarse return will move through the grinding circuit.
Select the image for a closer look.
Project selection
State the target particle-size distribution and test method, then provide the incoming powder characteristics. Ask for the proposed classifier and air arrangement, including expected return streams for the defined duty. Review how the classifier will connect to an existing mill and collector, particularly where the objective is to improve a current powder specification.
Bring the operating layout into the enquiry early. For an Australian installation, identify the site location, access constraints and available services, then request drawings for the exact proposed configuration. Ask for the equipment supply, purchaser responsibilities and installation interfaces to be listed clearly so competing proposals can be assessed against the same requirement.
Use the enquiry form to share details of your current and required powder tests, mill details, air connections and coarse-return arrangement. Add your site location, project stage and preferred timing. If you are still gathering technical information, tell us what you have so far. We can help identify what is needed for the next assessment.
The details that matter
| Model | S400 | S500 | S600 | S700 | S900 | S1000 | S1100 | S1200 |
|---|---|---|---|---|---|---|---|---|
| Motor Blower | Model | YCTL200-4A | YCTL200-4B | YCTL200-4A | YCTL200-4B | YCTL200-4B | YCTL200-4A | YCTL200-4A | YCTL200-4B |
| Power (KW) | 7.5 | 11 | 15 | 18.5 | 37 | 55 | 75 | 90 |
| Model | SCF-12NO.8C | SCF-12NO.8C | SCF-12NO.10C | SCF-12NO.12C | SCF-12NO.12C | SCF-12NO.16B | SCF-12NO.16D | SCF-12NO.12C |
| Volume | 24216 | 30900 | 37960 | 58200 | 119332 | 168000 | 192000 | 211000 |
| Air pressure | 2.18 | 2.43 | 2.34 | 2.07 | 2.26 | 2.70 | 2.70 | 2.60 |
| Rotating speed(r/min) | 1500 | 1600 | 1200 | 1000 | 800 | 960 | 960 | 710 |
| Model | Y180M-2 | Y200L1-2 | Y225S-4 | Y225M-4 | Y335M1-8 | Y335M1-6 | Y335M3-6 | Y335L-8 |
| Power (KW) | 22 | 30 | 37 | 55 | 132 | 160 | 200 | 220 |
| Select your model | Request quoteS400 | Request quoteS500 | Request quoteS600 | Request quoteS700 | Request quoteS900 | Request quoteS1000 | Request quoteS1100 | Request quoteS1200 |
Specifications that need clarification are marked for confirmation or omitted. Request the current datasheet for your selected model and configuration.
Specifications are based on published manufacturer information. Capacity depends on material and configuration. The downloadable PDF is a website summary; request current manufacturer drawings and the configured supply scope before ordering.
Provide current particle-size results, feed conditions and the existing circuit arrangement. Ask for an assessment identifying what a classifier change could address and any associated mill or air-system modifications.
Include the required and current size distributions, measurement method and any oversize limits. Material density, moisture and flow observations can help define the technical review.
Across Australia
Equipment enquiries for Perth, Brisbane, Sydney, Melbourne, Adelaide, Hobart, Darwin, Canberra and regional project locations. Tell us where your site is so freight, access and installation requirements can be assessed.

Western Australia (WA)
Albany, Bunbury, Busselton, Geraldton, Kalgoorlie–Boulder, Karratha, Mandurah, Port Hedland, Broome

Queensland (QLD)
Cairns, Gold Coast, Sunshine Coast, Townsville, Toowoomba, Mackay, Rockhampton, Bundaberg, Gladstone, Mount Isa, Hervey Bay, Ipswich

New South Wales (NSW)
Newcastle, Wollongong, Albury, Armidale, Bathurst, Broken Hill, Coffs Harbour, Dubbo, Goulburn, Griffith, Lismore, Orange, Port Macquarie, Tamworth, Wagga Wagga

Victoria (VIC)
Geelong, Ballarat, Bendigo, Mildura, Shepparton, Warrnambool, Wodonga, Wangaratta, Latrobe Valley

South Australia (SA)
Mount Gambier, Whyalla, Port Augusta, Port Lincoln, Port Pirie, Murray Bridge

Tasmania (TAS)
Launceston, Devonport, Burnie

Northern Territory (NT)
Alice Springs, Katherine, Palmerston, Tennant Creek

Australian Capital Territory (ACT)
Canberra region
Delivery, availability and service scope are confirmed for each quotation.
Enhanced Raymond milling
4 published models
Your next project starts here
Your equipment is already selected when you enquire from a product page. Add your contact details and a short message, and we can work through the requirements with you.
01 / Select your equipment
02 / Tell us what you need
03 / Discuss your project